Sold Henry J's

1951 Henry J SHOW QUALITY Gasser. This is a one of a Kind Vintage Style Gasser that was well engineered using all of the Highest Quality Parts with incredible attention to Detail. The car was completely custom built and was very recently completed using either all new or restored original Nostalgic Performance Parts. Many years went into this truly amazing example of classic nostaliga combined with state of the art engineering. Turn key show / street / strip car, what a ride..... Very solid engineering, best of everything, not a hodge podge rattle bucket.

Price: $25,000

Dan's Rolling Chassis Drag J
This car is very strait and well built. Could be made into a Street Rod or have fun at the Nostalgia Drags.
CHASSIS IS CERTIFIED FOR NHRA COMPITITION.
THE CAR is a Rolling Chassis LESS Motor , COAN P/G goes with car.

Price: $ 22K May consider trades.

This is a 1953 allstate real nice car's it has a 6 cyl engine. 3 speed trans New window 's and all rubber seal's. New new tail light's NEW PAINT JOB. New seat's and door panel's new clutch and pressure plate throw out bearing new carb starter fuel pump belt plug's changed to 12 volt all new new tire's and rim's run's peeerfect drives good it 's for sale for the right price
Iit still has the factory rocker panel's and the floor in it is still in good shape.

1952 Allstate
One of 1566 built in 1952. There were only 200 of this style made. Has no trunk or operating vent glass. Have list of all owners of this car. This car was purchased at sears in richmond VA. Has title and extra HenryJ as parts car $5500. Will trade for Chevy Drag Car, inclosed trailer or other.

1951 Henry J 2D SEDAN

Exterior Color: gray primer Interior Color: cream
Doors: 2-Door Transmission: C-6
Drivetrain: ford Engine: 302
Mileage: Not Available
Power Brakes
Cloth Interior
Power Steering

Owner's Description:

This is a nice StreetRod project.trunk model,302 ford,c-6 auto trans,new heidts front end,8"ford rear, power disc brakes,body is great not cut up, org.dash,new interior,this is a rare car you wont find one nicer not cut up or rusted ready for paint. "will trade for nostalgia coupe" or $7900 dollars obo.

1952 Henry J Corsair Deluxe

6 cyl. engine.
It is a true 52 everything on the car is original including the oak luggage rack (bought with the car as an add on).
It is not in perfect shape but not that bad either.
The interior is a total loss.
Have a few extra parts for it, a fender, a tail light, deck lid and a few other things.
I would like $1400.00 but that is not writen in stone.
I can tell you some history on the car if you would like.
The car was garage kept since 1965.

Detriot Michigan

1952 Henry J for sale.

The car is relatively complete - the interior is gutted but complete, stock 4 cyl. (out of car), complete second set of fenders (front & rear), extra trunk & hood. Had a project in mind but never seem to be able to get to it! As far as hot rod parts I have custom wheels (see attached pic Detail Page) and some huge tires for it, a Painless wiring harness and some pre-fabbed door panels. All the hotrod stuff is available separate for additional. I need to move this car as my storage just ran out and I have nowhere to keep it. I would be happy to send dig pics if you like but the car has no major damage and only small amount of rust in floorboards. I have two titles, one Calif. and one Wash. and body tags for both titles. Let me know what you want to do. I will part with the car and additional fenders (no rod parts) for $2000. Wheels and tires are $1200, the wiring kit (still in box) $200 and door panels (still in box) $100.

Auburn, WA

Summerfield, Fl.

HJ street rod which is still under construction, it is currently
sporting a special "hot rod black" paint job that I temporarily applied for the nostalgic drags down in Bradenton, Fl.

Price: $9,500,
Options:
Small block Chevy motor and trans,
Mustang 11 frt end, 8" ford rear
Floor shifter
Power brakes
New shocks,exhaust,gas tank, rocker panels, etc.

Location: Palmerton,PA
United States /Philadelphia

Description
1952 Henry J. Straight solid rust free body. Floors are solid as is the frame. Car has a 6 cylinder motor (not sure of the size) and a 3 speed standard transmission. The car runs, drives and stops, but don't plan on driving it home. It needs work to be road worthy. It's not in need of a complete restoration, but it does need work before I'd think about driving it any distance. The front seat has no covering (just the frame and springs), and there is no carpet or door panels.

Very Good condition for the year. Trunk and floors are solid. Rockers are solid
Price: $5,000

This 1954 Henry J has no rust and it is very staight. It has the original 4 cylider
motor and trans. All the chrome is in very good condition. It hasn't ran since 1984,
but probably wouldn't take much to get it running. It has up to date tags. I'm
asking $7,000.

Jerrys 1953

This is a 1953 Arizona car all original.
Started to work on restoration fell short of time, some parts are sandblasted.
Running good till O.D. went out Have all new rebuild parts for it bought from John Parker in Tucson. New taillights, extra rear window. Only rust is on front fender well, Quarter size.Some cosmetic dents.

I have $3,800 invested will sell for first $3,200.00

2-26-2004

51 Henry J Mounted on a S10 Frame

The car was purchased as a shell only. I used an S10 Blazer firewall, pan, dash, and frame. Car has a steel crank small block 400, edelbrock intake and carb. TH350C, Power disc brakes, steering and windows. Independent front suspension. New radiator, tires, rims, glass and window gaskets, alternator, water and fuel pumps.

Car is located in Arizona, asking $8.500.

Date: Sun, February 6, 2005 3:51 pm

1952 Allstate (#475 OF 1,566) project of mine. It is a No trunk
,and c/w a rolling '89 S-10 Blaser set up for SBC.

Asking $2,500.

Also, have a '35 Plymouth PJ Coupe ($1,500)
and a '39 Dodge Fordor (suicide) for $2,000.

OK "J" Man, Tex

Email: "TEX DEAN" <tjspjs@prodigy.net>

1951 Henry J

This J has been updated with pinto\mustang front and rearend, it will need the floor done. The floor is about 3/4 there with a few rust through holes, that could be patched, It also will need rocker panels. Ask Tex he may have some to sell with it.

OK "J" Man, Tex is selling this J for $3500.00 OBO
Trades considered.

Questions: Tex can been contacted by phone 918-341-4813 or via
his Email. "TEX DEAN" <tjspjs@prodigy.net>.

Tex has another Henry J for sale.
This trunk model is a custom Gasser Clone
With a '38 Dodge tubular straight axle attached to an original rolling '51 Henry J chassis.

It has a filled hood and a '59 Buick grill
The excellent exterior sheetmetal is well worth the asking price of $2,750

Which includes registration and an extra axle.

Semper Fi from the Henry J Guy, Tex
"TEX DEAN" <tjspjs@prodigy.net>

52 Henry J for sale
"Lance Mercer"

Here is a 1952 Henry J. The car has rust free and useable doors, fenders and
quarters. The rockers do have the tipical Henry J rust. The hood is the only bad
panel and I have another staight hood that I can give with the car. The car is not a
deluxe but has a 6- cylinder. The car has a continental kit type rear bumber, it
doesn't have the complete kit. It's just a complete never fooled with Henry J that
needs restored or gassered out. I'm asking $4000 for the car.
You may contact me at

Date: Tue, June 14, 2005 5:02 am

1951 Henry J For Sale

This is a 1951 Henry J with trunk, 6 cyl. engine runs good. Has a little rust in floor pan behind seat. Not so bad that it couldn't be restored to orignal condition. The rust on the floor has sheet metal panels that someone has put on there, but needs to be repaired better. The model number is K514 6cyl. and the mileage is 92552.

Asking price is $3,500.

MO, 63383
6-18-2005

Two Henry J's and some other cars.

1.1951 henry J corsair deluxe restorable complete with engine and title $3.000

2.1952 henry J corsair deluxe restrable complete with engine and title $3.000 trunk
model car In better shape then the 1951.

3.1980 GMC longbed 1/2 ton truck lowered suspension great driver not rusted out
350/350 combo $2000.

4.1985 GMC truck 1/2 ton formerly owned by 85 year old man 76 K actual miles.$2200.

5.1972 pontiac lemans rare optioned car loaded up with most gto opions from
factory,built engine with Rv cam shift kitted 400 tranny,buckets auto on floor, posi
rear and on and on could use minor body work and paint down the road great driver
runs and drives like a new car $4500.

6.1967 chevy 1/2 ton shortbed stepside pickup restored paint ready factory hotrod
with numbers matching 283 engine $10.000.
.

7.1970-1971 chevelle collection from great driver to projects needing minor stuff 5
cars total and alot of extra parts 1 price deal Is $30,000 theres no SS cars on this
small money deal.

E-mail direct for pics If your serious thank you.

"Slick Paint"

Date: Thu, July 28, 2005 8:46 pm

1951 Henry Pro-Street PROJECT.

-- COMPLETELY new rolling chassis
-- 400 Pontiac Big Block (400+ HP; new TRW forged pistons, standard bore, new
performance cam, completely and professionally built; Performer intake, edelbrock
carb, etc.)
-- TH375 tranny
-- narrowed 9" Ford rearend with Moser axles
-- New drive shaft (balanced)
-- New exhaust (headers; mufflers; exhause exits in front of rear tires)
-- Mustang II IFS completely rebuilt with all new parts
-- New rack and pinion
-- New Mickey Thompson tires front and rear on new aluminum wheels (tubbed in the rear)
-- FRAME boxed and painted
-- ALL new parts

BODY - stripped, blasted and primed (new rockers, new floor boards, tubbed, engine
recessed into the firewall, etc.) EXCELLENT shape

ASKING price - $15,000

Everything in superb shape and ready for paint and interior.

Lucille !! :-)
Sandy's 1952 Henry J
For Sale!

....I fell in love with her about 10 years ago, but she wasn't for sale then. Currently she's red and gold....someone painted her that way! Number 523 Paint number 140 and the trim number is 3481. She runs really well.......but the water pump needs to be replaced before I go on a trip!! :-) She is in good shape.....I've taken the old carpet out and the seats to get a good look at the floor. Not much rust!! Everything looks pretty sound. So she will be a good project for someone.

Asking Price :$4500

SOLD
Date: Sat, April 15, 2006 7:20 am

Tex Dean updated For sale items.

Lay Off Forces immidiate reduction of +10 year collection of Henry J / Allstate cars / Parts and other ODD ROD ORPHAN projects:

'37 Dodge cpe
'38 Dodge Coupe
'39 Chevy P'Up
'46 Ply Club cpe
(2) '49 Studibaker P'Ups
(2) '51 henry J's
(1) '52 henry J
(1) '52 Allstate
(1) 65 Chevy, SNB, Lowered, 350/350 Driving P'UP.
Please email/call for info/ prices:
tjspjs@prodigy.net / (918) 341-4813

6-28-2005

For Sale and time to downsize.
"TEX DEAN" <tjspjs@prodigy.net>
Date:   Mon, July 25, 2005 5:27 am

Projects... For Sale

(4) '51 Henry Js
(1)'47 Plymouth Club Coupe...
(1) '49 Studebaker P'up...
(1) '52 Studebaker P'up...

Semper Fi, Tex

Tom Haney and I just bought 4 Henry J's.

They're all for sale. They are all inaltered and I've got titles for all of them all.
please give me a call if you or anyone you know is interested.

FOR SALE
1951 HENRY J (the no trunk model). Unaltered car. Have title. $3800 obo.
1953 HENRY J. Unaltered car. Have title. $3500 obo.
These cars are located in Austin, Texas.

Date: Thu, April 14, 2006 9:34 am

Dale Z's Henry J

1953 Henry J Street Rod
Modifications completed in 1994 by experienced builder/painter
Less than 18,000 miles since modified
Drives / Handles nice
Some small chips in paint from driving - Car is a driver

Asking Price: $14,000 O.B.O

Date: Fri, July 7, 2006 11:54 am

Scott Hamela's 1951 Henry J

Currently the J is setup with a SBC, 350 Turbo auto trans, Power windows, Tilt wheel
Power brakes. It rides on the original frame, front suspension and brakes.
It has an S10 rear axle and brakes.

For Sale: Asking price is $12,500 OBO. Price is negotiable
and I would consider possible trades. Thanks.

2-17-2004

FOR SALE: '51 Henry J, street rod or race car project.

No trunk lid model -mounted on a complete '85 S-10 Blazer rolling chassis, front disc brakes, ps, stock rear end. 16 x 8 Centerline "Eagle" wheels ( R205/55 front ; R225/60 rear ), '67/'68 Camaro rear bumper, reclining bucket seats, steering column from late model Chevy with wiring intact. Much more than listed here...
Also available, completely assembled, balanced & blueprinted, professionally built
650 hp "pro-touring" 468ci BBC with Brodix aluminum heads, mild CompCam hyd.
roller cam, TRW forged 10.6 cr, Dart intake, internal balanced Callies crank,
Manley rods. New, never fired, premium components throughout, over $2,400 in
machine/assembly labor.

$2,000 for rolling Henry J. At home, available anytime.

Subject:   HENRY J FORSALE
Date:   Wed, October 18, 2006 3:11 pm

    FOR SALE NEW CAR COMING, NHRA & IHRA CERTIFIED, CAN BE SEEN IN THE NATIONAL DRAGSTER OCT. 20TH EDITION IN THE TOYO TIRES NATIONAL SUPER GAS SECTION.PRICE $16,000 LESS MOTOR/TRANS.

Also if anyone wants to see the coolest Henry J ever built come to the P.R.I. show in Orlando. FL on Dec. 14th-15th. We will be showing our new Pro-Mod HenryJ there. It is a all carbon-fiber body with a 1600hp motor under the hood. Thanks!

SOLD!

Oct 18 2006